Page 1 of 1

Nikon camera rubber cover panel pealing off....Glue recomme

PostPosted: Mon Jan 09, 2017 5:29 am
by haring
My Nikon dslr camera rubber cover panel is pealing off.... It happened to me the same with my old Nikon. It seems to be a permanent problem with Nikon cameras. Do you have any glue recommendation? The glue needs to be flexible enough and keep the rubber panel on the metal housing of the camera....
Thanks so much!

Re: Nikon camera rubber cover panel pealing off....Glue reco

PostPosted: Mon Jan 09, 2017 6:38 am
by gstark
In my experience, the consensus seems to be that, although it's a simple problem, there's no readily available adhesive that can rectify this issue.

Take it a local repair shop.

Re: Nikon camera rubber cover panel pealing off....Glue reco

PostPosted: Mon Jan 09, 2017 10:44 am
by biggerry
Image

http://blog.avernus.com.au/cemedine-super-x-no-8008/

this is the stuff specified in the Nikon Repair manuals. Otherwise a good wetsuit material adhesive also works well. If you were in Sydney i would lend you my tube of super-x :)

Re: Nikon camera rubber cover panel pealing off....Glue reco

PostPosted: Wed Jan 11, 2017 1:25 pm
by Matt. K
Pop rivetts?

Re: Nikon camera rubber cover panel pealing off....Glue reco

PostPosted: Sat Jan 14, 2017 8:41 am
by ozimax
Switch to Canon? :biglaugh: :biglaugh:

Re: Nikon camera rubber cover panel pealing off....Glue reco

PostPosted: Sun Jan 15, 2017 9:34 pm
by biggerry
ozimax wrote:Switch to Canon? :biglaugh: :biglaugh:

yeah he will need some kind of acceptable dynamic range tho ;) :biglaugh: